Sony LBT-DR5 - Manual (Page 7)

7
Step 3: Setting the
time
You must set the time before using the timer
functions. The clock is on a 24-hour system
for the European and Brazilian models, and a
12-hour system for other models.
The 24-hour system model is used for
illustration purposes.
3,5 1 2,4
Inserting two R6 (size AA)
batteries into the remote
Tips
• With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
• When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY (for LBT-W5000/W300/XB700/XB500
only) or DEMO (STANDBY) (for other models)
while the system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 Hold down LOOP and press 1/u to turn
off the system.
1
Press t/CLOCK SET.
The hour indication flashes.
2
Press TUNING +/– to set the hour.
3
Press ENTER/NEXT.
The minutes indication flashes.
4
Press TUNING +/– to set the
minutes.
5
Press ENTER/NEXT.
The clock starts.
continued