Shindaiwa 81644 - Manual (Page 4)

4
Safety Labels
Figure 3
Be Aware of the Working Environment
Avoid long-term
operation in very hot or
very cold weather.
Make sure bystanders or observers outside the
50-foot “danger zone” wear eye protection.
Be extremely careful
of slippery terrain,
especially during
rainy weather.
Always make sure the
appropriate cutting attachment
shield is correctly installed.
If contact is made with a hard
object, stop the engine and
inspect the cutting attachment
for damage.
When operating in rocky terrain or near
electric wires or fences, use extreme cau-
tion to avoid contacting such items with
the cutting attachment.
Be constantly alert for objects and debris that
could be thrown either from the rotating cutting
attachment or bounced from a hard surface.
Reduce the risk of
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that’s
about 16 paces—of an
operating attachment.
Figure 2
50
FEET
C242
Safety and Operation Information
Labels: Make sure all informa-
tion labels are undamaged and
readable. Immediately replace
damaged or missing information
labels. New labels are avail-
able from your local authorized
Shindaiwa dealer.
IMPORTANT!
This label indicates the minimum
distance between front handle and
rear grip per ANSI B175.3.