Symbol Technologies LS 3070 - Manual (Page 32)

4-3
LS 3070 Product Reference Guide: Maintenance and Specifications
1. Remove Lower Handle from Scanner.
Using a probe, press in the release button on the handle, as indicated at the
right. With button pressed in below the outer housing, slide the battery pack
out from the handle.
2. Insert Charged Battery Pack in Handle.
With release button down, slide charged battery pack up into handle until it
locks into place and the release button pops up into place as well.
Figure 4-2. Changing LS 3070 Battery Packs
Release
Button
LS 3070 Battery Pack Four Slot Charger with Charging Adapter