Troubleshooting – Sunbeam WF6810 User Manual
Page 14
Troubleshooting
The unit is leaking
The filter or water tank are not Remove the water tank and filter. Remove the
fitted correctly.
black rubber o-rings from the base of the unit and
fit back onto the filter cartridge. Wet the o-ring
seals and snap the filter back into place. With
a clean cloth, dry the seal on the unit, place
the water tank on the base and press down firmly.
No water
The filter or water
Follow instructions above.
is dispensed
tank are not fitted correctly.
The filter may be
Replace the filter.
blocked.
LED display lights
Contact Sunbeam Customer Service Help Line.
are not working
Note:
The ready light for chilled water may flicker
on and off as chilled water is dispensed and if
ambient temperature increases.
Problem
Possible cause
What to do
12