Samsung Digimax D53 - Manual (Page 16)

ŝ15Ş
Starting the recording mode
ƈ How to use the MANUAL mode ( )
You can manually configure all functions with the aperture value and shutter
speed.
1. Press the + / - button and menu for the shutter
speed and aperture value will display.
Up / Down button : changes aperture value
Left / Right button : changes shutter speed.
2. Press the + / - button twice and take an image.
* Smaller Aperture values make the object sharp but blur the background. Larger
Aperture values make both the object and background sharp.
* High Shutter speeds can capture a moving object in a still image as if the object is
not moving. Low Shutter speeds can capture a moving object with an ‘active’
effect.
ƈ How to use the MOVIE CLIP mode ( )
A movie clip can be recorded for as long as the available recording time of the
memory capacity allows.
1. Point the camera towards the subject and
compose the image by using the LCD monitor.
Press the shutter button and movie clips are
recorded for as long as the available recording
time. Movie clips will still be recorded if the shutter
button is released.
* If you wish to stop recording, press the shutter
button again.
* Image size and type are listed below.
- Image size : 640X480, 320X240, 160X120 (Selectable)
- File type
: *.avi (MJPEG)
ƈ Recording the movie clip without voice
You can record the movie clip without voice.
1. Press the Up button and the icon will display
on the LCD monitor.
2. Press the shutter button and movie clip is
recorded for as long as the available recording
time without voice.
3. To stop the recording, press the shutter button
again.
ƈ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite scenes
into a movie clip without having to create multiple movie clips.
ƃ Using Successive Recording
1. Press the shutter button and movie clips are
recorded for as long as the available recording time.
Movie clips will still be recorded if the shutter button
is released.
2. Press the Pause button ( ) to pause recording.
Press the Pause button ( ) again to resume
the recording.
3. If you wish to stop recording, press the shutter
button again.
[Successive recording of a movie clip]
Stop:Shutter REC: /