Installation – Sirius Satellite Radio SATELLITE RADIO SIR-ECL2nt User Manual

Page 6

Advertising
background image

6

SIR-ECL2nt Installation Guide

Installation

It is recommended that prior to starting the

installation, you read completely this

installation manual and follow the guidelines

listed below:

Consider the mounting location carefully.

You should make sure that you avoid the

following:

• Any location where the tuner is

exposed to moisture.

• Any location where the tuner is

exposed to extreme heat.

• Any location that would interfere with

moving parts on the vehicle or interfere

with driving.

Mounting the SIR-ECL2nt tuner

Be sure that you find a location that is flat and

has clearance above the tuner to

prevent any damage, as well as allow for

ventilation.

Do not install the tuner under the carpet or in

a small enclosed area without proper ventila-

tion. Doing so can result in damage to the

tuner or the vehicle. Use the supplied screws to

securely fasten the unit.

If you are attaching the tuner directly to the

vehicle’s chassis, be sure that you check to

make sure the area behind the tuner is free

from moving parts, fuel or brake lines, wire

harnesses or any other items which may get

damaged by drilling a mounting hole or from

the screws.

Installing the Antenna

The antenna includes a plastic cable cover/

tail which covers the exposed antenna

cable and keeps it attached securely to

vehicle roof. The tail also helps position the

antenna the proper distance from the rear

window, sunroof or rear hatch.
To attach the cover/tail:
1. Once you have determined the proper

mounting location (see the next

section), clean the area with the

supplied alcohol swab.

2. Connect the antenna cover/tail to the

antenna cable, making sure that the

strain-relief on the antenna seats into

the cover/tail groove. Route the cable

through the wire channel in the cover/

tail.

3. Remove the protective tape from the

adhesive and carefully position the

antenna with cover/tail and apply

pressure to secure it to the vehicle.

DATA

Adhesive Strips

Cable

Cover/Tail

Antenna

(Underside)

Antenna Cable

Cable Cover/Tail

Antenna

Vehicle

Caution:

Advertising