Lens replacement procedure (for "c" type ) – Sanyo LNS-T31A User Manual
Page 7
- 7 -
Turn the lens cover to counter-clockwise and pull it
toward front and remove the Lens Cover.
Remove 2 Screws-A.
Remove the front cabinet
REMOVE THE LENS COVER AND
FRONT CABINET
1
1.
2.
2
REMOVE THE LIGHT-BLOCK SHEET BASE
AND LIGHT-BLOCK SHEET
Perform the steps
to
for lens replacement.
1
6
First set the lens at the fully lower position with lens
shift adjustment.
3.
Slide the light-block sheet base upward and
remove it.
Remove the light-block sheet from lens.
1.
2.
LIGHT-BLOCK
SHEET BASE
FRONT
CABINET
LENS COVER
LIGHT-BLOCK
SHEET
SCREW "A"
LENS COVER
FRONT CABINET
3
REMOVE THE LENS
Grasp the Lens Lock Lever and tur n it fully
upward. Remove the Lens into the projector.
Disconnect the lens motor lead connector to the
socket on the lens attachment.
Remove 4 Screws and remove lens attachment.
1.
2.
3.
LENS
ATTACHMENT
SOCKET
CONNECTOR
LENS MOTOR
LEAD
LENS LOCK
LEVER
SCREW
Pull the Lens
Lock Lever
upward
LENS REPLACEMENT PROCEDURE (FOR "C" TYPE )