Sony KP-44DX2 - Manual (Page 36)

36
Technical Specifications
TV system:
I/DVB-T
Colour system:
PAL
SECAM, NTSC 3.58, 4.43 (only Video In)
MPEG 2 MP@NL
Channel Coverage:
I: UHF B21-B69
Projected picture size:
44” (approx. 112 cm. measured diagonally)
Rear Terminals
• 1 / 1 21-pin scart connector (CENELEC
standard) including audio/video input,
RGB input, TV audio/video output.
• 2 / 2 21-pin Scart connector (CENELEC
(SMARTLINK) standard) including audio/video input, S
video input, selectable audio/video output
and SmartLink interface.
• audio outputs (Left/Right) - phono jacks.
• RF In (
Analogue)
• RF In (
Digital)
• RF Out
• CAM (Conditional Access Module) slot.
• MODEM connection.
Side Terminals:
• 3 S Video input – 4 pin DIN
• 3 video input – phono jack
• 3 audio input – phono jacks
• headphones jack
Sound Output:
2 x 30 W (music power)
2 x 15 W (RMS)
Power Consumption:
220 W
Standby Power Consumption:
1 W
Dimensions (w x h x d) :
approx. 1100 x 1160 x 536 mm.
Weight:
approx. 68 Kg.
Accessories supplied:
• 1 Remote Control (RM-948)
• 2 Batteries (IEC designated, AA size)
• 1 RF Loopthrough cable
Other features:
• Digital terrestrial reception.
• Digital Comb Filter (High resolution).
• 100 Hz picture, Digital Plus.
• Digital Teletext.
• Analogue Teletext, Fastext, TOPtext.
• NICAM.
• Sleep Timer.
• SmartLink.
• Dolby Virtual.
• BBE.
• PIP.
• Auto Format.
• CAM connection (for future use only).
• MODEM connection (for service use only).
S
>
>
S
Design and specifications are subject to change without notice.
This instruction manual has been printed on:
Ecological Paper - Totally Chlorine Free
Additional Information