Samsung DJ68-00369L - Manual (Page 4)

3
2
OPERATING THE CLEANER
2-1. POWER CORD
2-2. POWER CONTROL (INFRARED CONTROL)
HANDLE CONTROL
NOTE : If the remote handle control is not
working, the cleaner can be operated
using the ON/OFF button on the body
of the machine.
NOTE : Don’t cover the handle sender when
you use a handle control button.
1. Vacuum cleaner ON/OFF ( )
Press the ON/OFF button to operate the vacu-
um cleaner. Press again to stop the vacuum
cleaner.
2. Vacuum cleaner (+ , -)
Press the (+) button to operate the vacuum to
highsuction power. Press the (-) button to oper-
ate the vacuum to low suction power.
Press the power ON/OFF button repeatedly to
start and to stop the vacuum cleaner
(OFF
→ ON → OFF)
1) REMOTE CONTROL TYPE
- HOSE
- BODY
NOTE
When removing the
plug from the
electrical outlet, grasp
the plug, not the cord.
POWER ON/OFF
RECEIVER
OPTIONAL - DIGITAL SIGNAL
[The cleaner is controlled by using
infrared signals.]
The IR light indicates the part
that receives the infra-red signal
from the handle control.
The filter light is illuminated when the dust pack
requires checking or emptying. An audio signal will
also sound.
The ON/OFF button operates the
vacuum cleanner or stops it.
SENDER
DJ68-00369L(0.3)-EN 2/19/08 5:26 PM Page 4