SMC Networks TigerSwitch - Manual (Page 58)

C
ONFIGURING THE
S
WITCH
3-8
Output
Port Configuration
Sets the output rate limit for each port 3-114
Output
Trunk Configuration
Sets the output rate limit for each trunk 3-114
Port Statistics Lists Ethernet and RMON port statistics 3-115
Address Table 3-122
Static Addresses Displays entries for interface, address or
VLAN 3-122
Dynamic Addresses Displays or edits static entries in the Address
Table 3-123
Address Aging Sets timeout for dynamically learned entries 3-125
Spanning Tree 3-125
STA
Information Displays STA values used for the bridge 3-127
Configuration Configures global bridge settings for STA
and RSTP 3-131
Port Information Displays individual port settings for STA 3-135
Trunk Information Displays individual trunk settings for STA 3-135
Port Configuration Configures individual port settings for STA 3-139
Trunk Configuration Configures individual trunk settings for STA 3-139
VLAN 3-142
802.1Q VLAN
GVRP Status Enables GVRP VLAN registration protocol 3-147
Basic Information Displays information on the VLAN type
supported by this switch 3-147
Current Table Shows the current port members of each
VLAN and whether or not the port is tagged
or untagged 3-148
Static List Used to create or remove VLAN groups 3-150
Static Table Modifies the settings for an existing VLAN 3-152
Table 3-2 Main Menu (Continued)
Menu Description Page