Samsung ML 2250 TI - Manual (Page 4)

Photo 14
Photo 16
4 ML 2250 Technical Instructions
Step 14
Release the locking tab that holds the
developer roller end cap.
(See Photo 14)
Step 15
Carefully slide the developer roller out
from the end of the cartridge.
(See Photo 15)
Clean the developer roller using a dry lint
free cloth.
Need trust-worthy, detailed Technical
Instructions for another engine?
V isit: www.futuregraphicsllc.com
E-mail: [email protected] Website: www.futuregraphicsllc.com
Photo 15
Step 16
Dump the old toner from the toner hopper.
Clean the hopper using dry compressed
air or a vacuum.
Step 17
Clean the doctor blade using a cotton
swab and Acetone.
(See Photo 16)
Photo 17
Step 18
Slide the clean developer roller back into
the cartridge. Make sure the developer
roller end cap locking tab snaps into
position.
(See Photo 17)
Photo 18
Step 19
Carefully place the drum back into the
cartridge.
(See Photo 18)
Notes