Sony SPP-A9171 - Manual (Page 22)

Basics 22 US
1
Pick up the handset from the
base unit.
2
Press (TALK) and wait until
“TALK” appears on the display.
The display also shows the talk
time in hours, minutes and
seconds.
The dialing keys light up.
The IN USE lamp on the base
unit lights up.
You then hear a dial tone. If you
hear five short error beeps and
“OUT OF RANGE” appears on
the display, move closer to the
base unit.
3
Dial the phone number.
4
When you’re done talking, press
(OFF) or replace the handset on
the base unit.
The display turns off.
Basics
Making calls
Additional tasks
To Do this
Adjust the handset volume Set the VOL switch to H (high), M (middle)
or L (low).
Switch to tone dialing temporarily Press (*TONE) after you’re connected.
The line will remain in tone dialing until
disconnected.
Switch to another call Press (CALL WAITING/FLASH).
(“call waiting” service*) Press (CALL WAITING/FLASH) again to
return to the first caller.
* You need to subscribe to this service from your telephone company.
(CALL WAITING/FLASH)
(*TONE)
VOL switch
(REDIAL/PAUSE)