Samsung GALAXY GT-S5690 - Manual (Page 94)

Connectivity
94
Connect to a WLAN using a Wi-Fi Protected
›
Setup (WPS)
Using WPS, you can connect to a secured network.
To connect to a WLAN with a WPS button,
In Idle mode, open the application list and select
1
Settings
→ Wireless and network → Wi-Fi settings.
Select
2
WPS button connection.
Press a WPS button on the access point within 2 minutes.
3
To connect to a WLAN with a WPS PIN,
In Idle mode, open the application list and select
1
Settings
→ Wireless and network → Wi-Fi settings.
Select a network indicated by the WPS icon and select
2
WPS PIN.
On the access point, enter the PIN and press the start
3
button.
Wi-Fi Direct
Learn to use the WLAN Direct feature to connect two devices
via a WLAN without requiring an access point.
Connect your device to another WLAN device
›
In Idle mode, open the application list and select
1
Settings
→ Wireless and network → Wi-Fi Direct settings → OK
→ Wi-Fi Direct.
Press [
2
] → Scan.
Select a device and then select
3
Connect.
When the owner of the other device accepts the
connection, the devices are connected.