Starting cold engine, Two-hand operation, Maintenance – Shindaiwa X7501920500 User Manual

Page 12: Throttle control

Advertising
background image

12

IMPORTANT!

To avoid engine damage due to over-revving do not block blower pipe.

1. Use only during appropriate hours.

2. Control engine speed with throttle lever, or for continuous use, set en-

gine speed with throttle lock lever.

3. Use lower speed to blow debris from hard surfaces. Additional speed

may be necessary to clean debris, snow, etc. from lawns and flower-

beds.

NOTE:

Never use a higher speed setting than necessary to perform a task. Re-

member, the higher the engine speed, the louder the blower noise. Mini-

mize dust by using blower at lower speeds. Keep debris on your property.

Be Smart - be a good neighbor.

Two-hand Operation

For added comfort and control, grip throttle control handle with left hand, and

lower handle/stand with right hand.

IMPORTANT!

Maintenance, replacement or repair of emission control devices and systems

may be performed by any repair establishment or individual, However, war-

ranty repairs must be performed by a dealer or service center authorized by

Echo, Inc. The use of parts that are not equivalent in performance and dura-

bility to authorized parts may impair the effectiveness of the emission control

system and may have a bearing on the outcome of a warranty claim.

Maintenance

WARNING!
Non-standard parts may

not operate properly with your unit

and may cause damage and lead

to personal injury.

NOTE:

Using non-standard replacement parts could invalidate your Shindaiwa warranty.

WARNING!
Before performing any

maintenance, repair or cleaning

work on the unit, make sure the

engine is completely stopped. Dis-

connect the spark plug wire before

performing service or maintenance

work.

IMPORTANT!

Inspect the entire blower for loose, damaged, or missing components, and

repair as necessary.

Throttle Control

Advertising