Sony RDR-HX780 - Manual (Page 100)

100
Presets channels manually.
If some channels could not be set using the
“Easy Setup” function, you can set them
manually.
If there is no sound or if the picture is
distorted, the wrong tuner system may have
been preset during “Easy Setup.” Set the
correct tuner system manually in the steps
below.
1
Press CH +/– to select the channel.
2
Select the item you want to change using
M/m, and change the settings using </
,, then press ENTER.
• To preset another channel, repeat from
step 1.
Skip
AFT
• If the Auto Fine Tuning function does not
work effectively, select “Off” and press m.
Press </, to obtain a clearer picture,
and press ENTER.
Video Settings (Video
Out)
You can adjust items related to the image,
such as size and color, according to the type
of TV or tuner connected to the recorder.
Selects the signal format in which the
recorder outputs video signals: interlace or
progressive, from the COMPONENT
VIDEO OUT jacks.
b Notes
• When picture noise appears after you set the
recorder to progressive format, hold down x
(stop) on the recorder, and press Z (open/close)
on the recorder.
• No video signals are output when using the
HDMI connection.
Manual CH Setting
On Select this when the channel
is unused or contains
unwanted channels.
The selected position will be
skipped when you press
CH +/–.
Off Does not skip the selected
channel.
On Turns on the Auto Fine
Tuning function.
Normally select this position.
Off Allows you to adjust the
picture manually.
Channel
Component Video Out
Normal(Inter-
lace) Outputs signals in the
interlace format.
Progressive Outputs signals in the
progressive format. Select
this when you want to view
progressive signals.