Sony MPD-AP20U - Manual (Page 55)

55
Continued
Miscellaneous
3
Click [Yes].
The following dialog box opens.
4
Stop the device with the icon ( )
on the taskbar, then disconnect the
USB cable from your computer.
5
Click [OK].
The following dialog box opens.
6
Click [Yes].
Your computer restarts.
With a Macintosh computer
Mac OS 9
To remove the drive from your
computer, delete the “MPD-AP20U
Bus”, “MPD-AP20U Shim”, “MPD-
AP20U USB” system extension
installed at the same time as the writing
software.
Mac OS X (ver. 10.1)
Because this operating system comes
standard with writing software, there is
no need to remove the device driver.
Usage Notes
Important precautions
• Never move or lift the drive when it is
connected to your computer.
Specifically, do not subject the unit to
vibrations or physical shocks while
writing to a disc.
• Do not use any AC adapter other than
the one provided. Using a different
adapter could damage the drive.
• Do not bend the USB cable sharply,
especially near the connectors. Doing
so may damage the cable or cause
poor contact.
Operation and storage
conditions
Avoid using or storing the drive in a hot
or humid environment, or where it may
be subjected to severe vibrations or in
direct sunlight.
Operation
Place the drive (or cradle) on a level
surface when it is connected to your
computer.
Shipping
• Keep the packing materials. They may
be necessary if you ever need to ship
the drive.
• Before shipping the drive, be sure that
there is no disc in the drive.