Sunbeam SMW730 - Manual (Page 12)

(4) Press numerical pads to input the second cooking time, the maximum cooking time is
99 minutes and 99 seconds.
(5) Press " START " to start cooking, the remaining cooking time will be displayed;
":","MICRO", "POWER" indicators will be flashing.
(6) One "beep" will be sound when the first cooking ends, and then the second cooking
will begin
5. Fast Starting
(1) In waiting state, instant cooking at 100% power level can be started by selecting a cooking
time from 1 to five minutes by pressing corresponding numerical pad. Press " +30SEC "
to increase the cooking time; the maximum cooking time is 99 minutes and 99 seconds.
(2) In waiting state, instant cooling at 100% power level with 30 seconds' cooking time can
be started by pressing " +30SEC ". Each press on the same button will increase cooking
time by 30 seconds. the maximum cooking time is 99 minutes and 99 seconds.
Note: Each press on "+30SEC." can increase cooking by 30 seconds for the micro and
Auto menu cooking. However, the operation will not work under "Auto Defrost" operation.
6. Defrosting WT Function
(1) Press " DEFROST W.T. ", LED will display "dEF1"; when at the same
time "MICRO", "DEFROST" indicators will be light.
(2) Press numerical pad to input weight to be defrosted. " Oz " indicator will be light.
Input the weight ranged between 4~100 Oz.
(3) If the weight entered is not within 4~100, the input will be invalid. A "beep" will be sound
and the microwave will not work until valid numbers are input .
(4) Press " START " to start defrosting, the remained cooking time will be displayed. ":",
"MICRO" and "DEFROSTING" indicators will be flash and the " Oz " indicator will go
out.
7. TIME DEFROST Function
(1) Press " TIME DEFROST ", LED will display "dEF2". At the same
time, "MICRO", "DEFROST" indicators will be light.
(2) Press numerical pads to enter defrosting time. The effective time range is 00:01~99:99
(3) If the time entered is not within 00:01~99:99, the microwave will not work until valid
numbers are input.
(4) The default microwave power is power level 3. If you want to change the power level,
press " POWER " once, and the LED will display "PL 3", then press the numerical pad
of the power level wanted.
(5) Press " START " to start defrosting. The remained cooking time will be displayed. ":",
"MICRO" and "DEFROSTING" indicators will be flash.
11