Positioning the speakers, Setting the clock, Positioning the speakers setting the clock – Sony MHC-LX10000 User Manual
Page 8
8
US
Place the front speakers at an angle of 45
degrees from your listening position.
Use buttons on the remote for the operation.
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET.
“CLOCK” appears in the display. Then, the
hour indication flashes in the display.
3
Press –
.
or
>
+
repeatedly to set
the hour.
4
Press ENTER.
The minute indication flashes in the
display.
5
Press –
.
or
>
+ repeatedly to set
the minute.
6
Press ENTER.
The clock starts functioning.
To adjust the clock
1
Press CLOCK/TIMER SET.
“SET” appears in the display, then “PLAY
SET?” flashes in the display.
2
Press –
.
or
>
+ repeatedly to select
“CLOCK SET?”, then press ENTER.
The hour indication flashes in the display.
3
Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
Positioning the speakers
Front
speaker
(R)
Surround speaker
(L)
Surround speaker
(R)
Front
speaker
(L)
Unit
45°
Setting the clock