Senco RoofPro 455XP - Manual

RoofPro
™
455XP
XtremePro
™
1¾" Coil Roofing Nailer
Applications:
Features and Benefits:
Tool Specifications:
Fastener Specifications:
Step up to the tough and dependable RoofPro 455XP Coil Nailer
It’s loaded with the features you asked for, yet is light enough for
one-handed operation. Simply the best roofing nailer money can buy.
Item #: 3D0101N: Sequential Actuation (Restrictive)
Weight: 5.4 lbs. ( 2.5 kg)
Height: 9¾" (247.65 mm)
Length: 9¾" (247.65 mm)
Nail Capacity: 120
Collation: Conical wound, angled coil wire
Operating Pressure: 70-120 psig (4.8-8.3 bar)
Mode of Operation: Tool is available with either sequential
or contact actuation trigger mechanism.
Hose Fitting: ¼ " NPT
Drives 11 gauge (.120"), Full Round Head Nails ¾" 1¾" smooth shank.
Capacity 120.
For asphalt and fiberglass shingle nailing, for both new roofs
and reroofing. Also for attaching waterproof tar paper, metal
drip edges, insulation board, and, with a special optional attachment,
vinyl and aluminum siding.
• Aluminum main housing and cap – more durable than magnesium
for punishing roofing environments
• Weighs just 5.4 lbs. for easy one-handed operation
• Tool-free adjustable depth of drive for consistent and controllable
nail set
• Comfort and convenience features include: durable molded comfort
grip, 360 tool-free adjustable exhaust, and adjustable shingle guide
• Steel wearplates reduce shingle abrasion on tool
• Adjustable nail canister accommodates entire range of true
round-head roofing nails
• Tool includes case, tool oil and wrench
Carton
Length Item Code Count Finish
¾ x.120 M003101 7.2M Galv
7 ⁄
8
x.120 M003102 7.2M Galv
1 x.120 M003103 7.2M Galv
1¼ x.120 M003104 7.2M Galv
1½ x.120 M003105 7.2M Galv
1¾ x.120 M003106 7.2M Galv
7 ⁄
8
x.120 HM12ADAP 7.2M Weatherex II
1¼ x.120 HM15ADAP 7.2M Weatherex II
1½ x.120 HM17ADAP 7.2M Weatherex II
1¾ x.120 HM19ADAP 7.2M Weatherex II
HJ (Galv)
1½
1¼
¾
1¾
7 ⁄
8
1
.120 .120
HM*
(Weatherex II)
Listed
®
©2007 Senco Products, Inc. www.senco.com