Samsung SNC-B2335P - Manual (Page 65)

English _65
●
SETUP SCREEN
Activation time : Sets the operation time of the intelligent video analysis.
Always : Confi gured action is performed whenever an intelligent video analysis
event occurs.
Only scheduled time : Confi gured action is performed when intelligent video
analysis event occurs during the specifi ed time period.
Action : You can confi gure the action for an intelligent video analysis event.
Alarm output : Sets the alarm output port for the signaling the intelligent video
analysis event.
Output duration : Sets the alarm signal dwell time to the Alarm Output port on
an intelligent video analysis event.
When another intelligent video analysis event follows the previous one, the
output duration time is reset based on the most recent event.
Alarm image transfer : If selected <Enable>, depending on your setting of
<Event> - <Transfer setup>, the image in JPEG format will be sent to the
registered address via FTP or e-mail (SMTP), or saved in the SD memory card.
To set the scheduled transfer
You can set to transfer the JPEG image to the FTP/SMTP server saved in the SD memory
card at a specific interval.
Select <Event> - <Schedule>.
The Schedule Transfer setup window
appears.
Schedule transfer function :
If selecting <Enable>, the schedule
transfer function will be activated;
if selecting <Disable>, it will be
deactivated.
Transfer interval : You can set the
time interval to transfer images.
You can set the unit of the interval to <seconds> or <minutes>; you can also set to
transfer one image per 5/15/30/45/60 seconds, or one per 5/15/30/45/60 minutes.
Activation time : You can set a time to execute a specific command when a sched-
ule transfer event occurs.
Always : Always sends an image at the set interval.
Only scheduled time : Periodically transfers image only during the specifi ed time
period.
When done, click [Apply].
Your settings will be saved.
y
-
-
y
-
-
-
1.
y
y
y
-
-
2.