Sony NT-2 - Manual (Page 23)

23
-EN
Playback
To prevent the buttons from being accidentally operated, use the Hold
function.
It can lock the controls while you are walking with the recorder in your bag or
pocket. Even when this function is activated, you can still reset the tape
counter and change the display.
Slide HOLD in the direction of the arrow.
The HOLD switch on the recorder works to lock the controls on the recorder.
The HOLD switch on the remote controller works to lock the controls on the
remote controller.
To release the Hold function, slide back HOLD in the opposite direction of
the arrow.
Knowing the side of a tape (A/B side
checking function)
Before starting operation, you can check which side of the tape in the recorder
is to be played or recorded.
While the recorder is not operating, press p for a while.
” A Side” or “B Side” appears in
the display.
Locking the controls (Hold function)
0
FWD
6
12
20
30
40
–dB
L R
0
FWD
6
12
20
30
40
–dB
L R
Useful functions
HOLD
HOLD