Sunbeam OSKAR LC3200 - Manual (Page 5)


SAFETY PRECAUTIONS FOR YOUR
SUNBEAM FOOD PROCESSOR LC3200.
• Always use extreme care when handling
processing blades and cutting discs. These
are extremely sharp and may cause injury if
handled incorrectly. Always store processing
blades and cutting discs in their respective
covers or processing containers.
• Unplug from power outlet when not in use,
before putting on or taking off attachments,
and before cleaning.
• Do not put hot liquids into the food
processor bowl or blender. Warm liquids
only.
• Avoid contacting moving parts at all times.
• Place the processor bowl onto the base of
the processor before fitting any attachments.
• All blades and attachments should be
removed with care before cleaning.
• Do not over fill the processor.
• Do not exceed the max indicator 3 cups /
750mL when processing dry ingredients.
• Do not exceed the liquid max indicator
2 cups/500mL when processing liquids.
• Do not process for longer than the time
periods recommended in the operating
chart.
• Always remove the blade before emptying
the processor bowl of its contents.
• Do not operate this food processor for more
than 10 seconds using heavy loads. None
of the recipes in this instruction booklet are
considered to be heavy loads.
Important instructions – retain for
future use.
Sunbeam’s Safety Precautions
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.