Smooth Fitness 7.1HR - Manual (Page 21)

SMOOTH 7.1HR POWER FOLDING TREADMILL
Visit us at: www.smoothfitness.com
21
COMPUTER OPERATION
COMPUTER OPERATION:
Power on, LCD 1 and 2 will light up, beep for one second, and then display the SELECTING MODE on the screen as shown
below.
SELECTING MODE:
P1: Quick Start
P2: Time Course
P3: Distance Course
P4: Calories Course
P5: Preset 15 Minute Workout Program
P6: Preset 30 Minute Workout Program
P7: Preset 45 Minute Workout Program
P8: Heart Rate Control Program
Select the desired PROGRAM by pressing INCLINE UP, DOWN button and then press ENTER.
USER DATA SET UP:
The computer can memorize 6 different users personal data. These are displayed on LCD 1 as U-1 through U-6. It is
necessary to set up the user data in order to run the following programs:
RECOVERY HEART RATE CONTROL:
When selecting the HEART RATE CONTROL (P8) program or pressing the RECOVERY button on the console the following
information is displayed on LCD 1. For first time use please follow the NEW USER DATA SET UP procedure.
If you have previously set up your personal data press ENTER through the entire set up procedure and follow the
RECOVERY and HEART RATE CONTROL procedure.
NEW USER DATA SET UP:
After pressing the RECOVERY button on the panel or selecting the HEART RATE CONTROL program, press INCLINE
UP/DOWN button to select the USER 1-6. It is recommended that the first user is set up as USER 1 and follow the order for
additional users.