Samsung SCH N391 - Manual (Page 17)

33
CCa allll FFu un nccttiio on nss
Manual Pause Dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you want to
call, such as a bank’s teleservice phone number.
2. Press the MENU key to access the options.
3. Select the pause you want and press the OK key.
• Press the 4 key for Hard Pause. The letter “P”
displays, meaning that a hard pause will occur at
that point in the dialing sequence.
• Press the 5 key for 2sec Pause. The letter “T”
displays, meaning that a “Timed” pause will occur
at that point in the dialing sequence.
4. Enter the number to be sent after the pause and
then press the key to dial the first number.
5. For a hard pause, press the key again at the
prompt to send the additional number after
connecting.
If you enter the number using a 2-second pause(s),
the phone sends the number that follows the pause
two seconds after the connection.
32
CCa allll FFu un nccttiio on nss
Pause Dialing from a Stored Phonebook Entry
1. Dial the number of the service you want to call from
the Phonebook.
2. If you stored the number using a hard pause(s), wait
for the appropriate prompt from the number you are
calling. When prompted, press the
key to send
the DTMF (Dual Tone Multi-Frequency) number that
follows your pause.
If you stored the number using a two second
pause(s), your phone transmits the number that
follows the “T” pause two seconds after the
connection.
3. “Sending DTMF” flashes on the display and the
transmitted tone sounds.
4. Repeat from step 2, if necessary.