Simplicity ZT2761F - Manual (Page 66)

60 TP 400-7087-02-SL-D © Copyright 2004 Ferris Industries. All Rights Reserved.
The above parts group applies to the following Model Nos.:
ZT2561F
ZT2761F
Decals - Brand, Model, Safety & Operation
OPERATION
To Start Engine:
To Stop Engine:
Seat must be occupied, PTO
Switch OFF, Parking Brake ON
and both control handles are
locked in Neutral.
Engage Parking Brake, Throttle at
half to full, turn Ignition Switch Off.
Before Leaving Machine: Turn PTO switch off, shut off engine,
remove key, and set Parking
Brake
To Operate PTO Clutch:
Operator must be in seat.
Pull up to Engage.
Push down to Disengage.
When Operator Leaves Seat: Engine will shut off if PTO is on.
Engine will shut off of Parking Brake
is off.
Engine will shut off if both control
levers are not locked in neutral.
GROUND SPEED AND
STEERING LEVERS
Right lever controls speed
and direction of right drive
wheel. Notch is neutral
lock.
Left lever controls speed and
direction of left drive wheel.
Notch is neutral lock.
Steer by slowing the lever in
the direction of the turn.
PARKING BRAKE
LEVER
Pull to set Parking Brake.
Push to release Parking
Brake.
DECK LIFT PEDAL Push to raise deck.
CUTTING HEIGHT
ADJUSTMENT PIN
DO NOT TOW!
Damage may result to
Hydrostatic Transmission.
WARNING
BEWARE OF
POWER DRIVEN PARTS
GREASE
DAILY
21036
MAX. OIL LEVEL HOT
"#'
HYDRAULIC OIL
RESERVOIR
Use either Mobil 1 15W-50 Oil
OR Castrol Syntec5W-50 Oil
DO NOT USE CONVENTIONAL OILS!
TM
TM
45923
Key
Switch
20A
Charge
Circuit
20A
PTO
Clutch
20A
Auxiliary 20A
46503
1
3
6
7
8
9
10
11
12
13
14
19
20
21
22
NOTE: Decals are NOT shown to scale.
61"
23
24
2
15
16
5
4
17
18
25
26
Old Version
New Version