Sony CFD-E55L - Manual (Page 20)

The Timer 20 GB
Before you set the clock, connect the power source (see
page 26).
1
Press CLOCK for 2 seconds until the hour digit
flashes.
2
Press TUNE TIME SET + or – until you set the
current hour. Then press DSPL ENT MEM.
The minute digits flash. Set the minutes by
pressing TUNE TIME SET + or – until the correct
minute is displayed.
3
Press DSPL ENT MEM.
The clock starts from 00 seconds.
Setting the clock
“– –:– –” indication appears in the
display until you set the clock.
The Timer
Tip
The time display
system:
CFD-E55:
12-hour system
CFD-E55L:
24-hour system
,
CLOCK
DSPL
ENT MEM
TUNE
TIME SET –, +