Smooth Fitness 6.25 - Manual (Page 20)

SMOOTH 6.25 MOTORIZED TREADMILL
Visit us at: www.smoothfitness.com
20
STABILIZER ADJUSTMENT
How to level the treadmill:
An uneven floor or improper stabilizer level can cause the treadmill to wobble during use as well as the incline
adjustment to function incorrectly. Please follow the procedure described below to make sure the treadmill stabilizer
is adjusted correctly prior to use. You may need the assistance of another person to perform this adjustment.
1. There are four stabilizers and two
cushions located on the underside
of the treadmill as shown in drawing
1. These all need to sit firmly on
the floor to prevent the treadmill
from wobbling during use.
1. Four stabilizers towards the rear and two cushions at the front.
2. Inspect each side of the treadmill
base frame. The treadmill should
sit on the floor with all four
stabilizers and both cushions
resting firmly on the floor as shown
in drawing 2. Shake the
handlebars back and forth to check
if they are resting firmly on the floor.
If they are not, tilt the treadmill to
one side to adjust the stabilizers as
shown in drawing 3. Simply turn
the stabilizers like a screw to adjust
their heights. Repeat this until the
treadmill sits firmly on the floor.
2. Check position of stabilizers and cushions.
3. Tilt treadmill to access stabilizers.