Smeg LSA4551B - Manual (Page 5)

User instructions
14
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program (*) ECO program
Load 9 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting Depending on the model 3/4 or 4/6
START PROGRAM
To start the dishwasher, press the START/PAUSE button (4) for a few seconds, until
the light of the first phase of the selected program starts to flash (confirmation beep).
As the program runs, the PHASES/PROGRAM lights (8) will indicate the current cycle
status:
END PROGRAM
When the program finishes, a buzzer sounds briefly and all the
PROGRAM PHASES lights (8) flash. Press any of the SELECTION
PROGRAMS buttons (2), stops the light flashins, and the
dishwasher is now ready to perform a new cycle; opening and
shutting the door or switching the appliance off and on has the same
effect.
INTERRUPTION OF A PROGRAM
In order to interrupt a running program it is necessary:
• press
the START/PAUSE button (4), the light of the current phase goes out;
• keep the button pressed until the PROGRAM PHASES lights (8) come on (confirmation
buzzer).
Prewash
Wash
Rinse
Dry
The light of the phase in progress will flash, while
the lights of previous and subsequent phases remain on.
N.B.
during execution of programs which do not
include a prewash, the first PHASES/PROGRAM light
(8) will remain off.