Read all instructions, Using the ultrasonic humidifier, Finding the ideal humidity level for your home – Sunbeam 697 User Manual

Page 2

Advertising
background image

When using electrical appliances,
especially when children are present,
basic safety precautions should always
be followed, including the following:
1. Always have water in the water tank

when operating unit.

2. Use only clean, cool, tap water to fill

tank (softened or distilled water is
recommended, if tap water is hard).

3.To avoid white dust (caused by high

mineral content in tap water), you
may use distilled water.

4. Use only 110-120v AC outlet. As with

any electrical device, plug and unplug
unit with dry hands only. Turn unit off
to unplug.

5. Never operate unit with a damaged

cord or plug.

6. Always place unit on a flat, level

surface away from direct sunlight.

Keep cord away from heated surfaces
and areas where it could be walked
on or tripped over.
Note: The mist will automatically shut
off when the tank is empty; however
the fan will continue to run.

7. Unplug the unit when not in use and

whenever you clean or move the unit.

8. Do not add medication of any type

into the nozzle, base or water tank.
Do not cover any opening of the unit
or insert objects into any openings.

9. The unit should not be left

unattended in closed rooms as air
could become saturated and leave
condensation on walls or furniture.
Always leave room door partly open.

10.Do not tilt or tip unit or attempt to

empty or fill it while it is operating.

1

Read all instructions:

Important Safeguards

IMPORTANT!

Place unit on a level surface away from direct sunlight. Keep cord away from heat-
ed surfaces and areas where it could be walked on or tripped over.

Using the Ultrasonic Humidifier

1. Fill Water Tank.
Remove tank from base. Turn upside
down and unscrew filling cap. Fill tank
with clean, cool, distilled, or tap water.
Water temperature should NEVER be
too hot or too cold. Return tank to
base and let sit for a few minutes.
Be sure the filling cap of the tank is
tightened firmly.

2. Turn Unit On.
Plug power cord into a 110-120V AC
wall outlet only. Turn power switch to
“On” position. Power light will illumi-

nate. Turn mist nozzle until the desired
level is being released. Aim nozzle away
from furniture and walls.

3. Turn Unit Off When Finished.
Always turn humdifier off when water
runs* out. Unit will continue to operate
when tank is empty.

(*)Humidifier will run up to 12 hours on
Low; 6 hours on High.

NOTE: Do not let water sit in tank for long. This can encourage bacterial growth.

• Aim for 30 to 50% relative humidity.

• Humidity will vary room to room, so

adjust accordingly.

• If windows and walls fog or frost,

reduce mist intensity.

• If a room is too humid, ventilate it by

opening a door or window, and adjust
mist intensity. High levels of humidity
can allow moisture to collect and
harm furniture and walls, especially
wallpaper. It can also encourage
bacterial and fungal growth.

Finding the Ideal Humidity Level For Your Home

Advertising