Samsung SNC-B2331-FRA-QG - Manual (Page 4)


Rear Side
Item Description
Video Out Port Video signal output port connected to the monitor.
System, Power
Indicators
SYSTEM
ON: The camera is turned on and connected to the network properly.
Blinking: During DDNS setup, or in case of setup failure, or in a state of
unstable network connection
OFF: When the system is rebooting, or turned off
POWER
ON: While the power is on
OFF: If the power is off
Reset Button
Resets the camera settings to the default.
Press and hold it for about 3 seconds to turn off the system indicator and restart
the system.
SYSTEM POWER
RESET
NETWORK
GND
1 2 3 4 5
VIDEO
AC 24V LINK ACT
DC 12V
1,2 : ALARM IN 1,2
3 : GND
4,5 : ALARM OUT 1,2
SNC-B2331-ENG-QG.indd 4 2009-08-20 오전 11:42:35