Samsung SCS-26UC4 - Manual (Page 2)

BEFORE YOU BEGIN
To use a Verizon Wireless Network Extender you need:
An always-on broadband Internet connection with a minimum speed of 300 kbps. •
An available Ethernet port on either your broadband modem or a router connected •
to the modem. Note: If you are connecting your Network Extender to a router, please
ensure that it supports Virtual Private Networking (VPN). Most routers support this
functionality, but if you are unsure of your router’s capabilities, refer to the manual
that came with your router.
Your Network Extender package should contain the components shown below:
CONNECTING YOUR NETWORK EXTENDER
The Network Extender needs to be located: 1.
Near a window (if this is not possible, see •
“External GPS Antenna” in the User Manual)
At least two feet away from your router if it
•
supports Wi-Fi
For best results, place the Network Extender
in an elevated location, such as the top of a
bookshelf or tall cabinet.
Connect one end of the included Ethernet
2.
cable to an open port on the router (1) and
connect the other end to the WAN port lo-
cated at the rear of the base station (2).
Plug the power supply connector into the DC
3.
12V power port located at the rear of the base
station (3).
Insert one end of the power cord into the
4.
power supply and then plug the other end
into an available outlet (4).
Network
Extender
Ethernet Cable
Power Cord
GPS Antenna
Cable
Power
Supply
GPS
LED
WAN
LED
System
LED
Power
LED GPS
Antenna
Wireless
Antenna
Heat
Vents
WAN
Port
DC12V
Power
Port