Samsung Digimax 301 - Manual (Page 16)

16
Connecting to a Power Source
Battery status
Battery indicator
The batteries are fully
charged.
Prepare new batteries.
There is no battery capacity.
Replace with new batteries.
There are 3 indicators for battery condition that are displayed on the LCD monitor.
3. To close the battery chamber cover, push it until it clicks.
2. Insert the batteries taking note of the
polarity (+ / -).
1. Open the battery chamber cover by pushing in the direction of
the arrow.
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+ and-).
Using the batteries
Inserting the AA type battery Inserting the CR-V3 type battery
The Digimax Battery Pack is a rechargeable external
Li-ion battery for use with most digital cameras.
These optional battery packs provide long lasting
power and their operating performances are much
improved over Ni-MH and Alkaline batteries. This is
due to the mass storage lithium ion cell. Refer to the
illustrations.
Using the Digimax battery pack ( Optional : SBP-3603, 3.3V)