Sanyo PLC HF10000L - Manual (Page 13)

1
Indicators
q
w
e
r
t
y
e WARNING TEMP. indicator
This indicator flashes red when internal projector
temperature is too high. (pp.78, 85-87)
q POWER indicator
This indicator lights green when the projector
is ready to be turned on in standby mode. And
it flashes green in Power Management mode.
(pp.62, 85-87)
w LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode. (pp.85-87)
Part Names and Functions
r WARNING FILTER indicator
– Blinks slow when the filter is being scrolled.
(pp.71, 85)
– Blinks fast when the filter scroll is not working
properly. (pp.71, 87)
– Lights orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement. (pp.67, 71, 87)
t SHUTTER indicator
Lights blue when the shutter is closed. (p. 85)
y LAMP  REPLACE indicator
Lights orange when the projection lamp 2 reaches
its end of life (pp.75, 86)
u
u LAMP 1 REPLACE indicator
Lights orange when the projection lamp 1 reaches
its end of life (pp.75, 86 )