Sony TTR1 - Manual (Page 37)

37
3. Turn the TUNE knob to highlight Change lock code . Press the
TUNE knob .
4. You will be prompted to enter the original lock code . If this is the
first time you are changing the lock code, enter 1111, otherwise
enter your existing lock code . Use the 0-9 number buttons on the
Radio or Remote Control to enter the
lock code . If you make a mistake, turn
the TUNE knob to highlight BKSP and
press the TUNE knob to erase the
character . When you have selected all
4 digits of your code, turn the TUNE
knob to highlight OK and press the
TUNE knob .
5. You will be prompted to enter the new code . Enter the new code
you desire in the same way . When you have selected all 4 digits
of your code, turn the TUNE knob to highlight OK and press the
TUNE knob .
6. You will be prompted to enter the new code again . Enter the new
code again in the same way . When you have selected all 4 digits
of your code, turn the TUNE knob
to highlight OK and press the TUNE
knob .
7. If you have entered your new code
correctly, New Code Saved will be
displayed .
8. Press MENU to exit .
Enter orginal code
BKSP
OK
CANCEL
New code saved
Category Tune