SPT SF-613 - Manual (Page 8)

7
2. After filling with water, do not tilt unit and avoid moving unit
– which may
cause water to overflow the sides of the tank and leak. If unit needs to be
moved a little, push on the side gently. (Fig. 5)
3. Never turn the unit on its sides. (Fig. 6)
4. Do not place any heavy objects on top of the Air Cooler. The air outlet must
not be obstructed. (Fig. 7)
Fig. 8 Fig. 9 Fig. 10 Fig 11
5. Keep a minimum space of 6 inches around the unit. (Fig. 8)
6. Suitable ambient temperature range is 68~104°F. The body of this Air Cooler
should not be placed in area with extremely high or low temperature. When
ambient temperature is high, change water frequently to prevent mildew and
mold growth. (Fig. 9)
7. Never wet the unit or spray water onto the control panel or LCD. (Fig. 10)
8. Do not use any corrosive cleaner or solvent. (Fig. 11)
9. If using unit as a humidifier during cold weathers (below 32°F), be sure to
empty and dry up the water tank after use to prevent water freezing. After
emptying water from the drain, use a towel to suck up remaining water.
10. Empty the water tank before moving the Air Cooler.
11. Unplug power source when not in use.
12. Do not use the COOL function if unit is used in a damp and closed space.
13. Do not place fingers or insert foreign objects into the louver during operation.
14. Do not operate unit with a damage power cord or plug. Contact Sunpentown,
do not attempt to repair on your own.
15. Basic precautions should be taken when operating unit near young children.
16. When operating in COOL mode, pay attention to water level and add water
when water level is less than 1/3 full. Do not operate COOL mode on an
empty tank, as this may cause water pump to malfunction.
www.sylvane.com 1-800-934-9194