Samsung HT-DB400M - Manual (Page 53)

52
• Audio language and subtitles will not work for DVDs not containing
them, and depending on the disc, they may work differently.
Audio language and
• Are you using a disc that does not contain menus?
Menu screen does not appear even
when the menu function is selected.
• While “ NO DISC ” message appears on the display of main unit, hold
the main unit's button for longer than 5 seconds.
“INITIAL” appears on the display and all settings will return to the
default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• Turn off the power and hold the button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
The password for rating
level has been forgotten.
• The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
• Is the antenna connected properly?
• If the antennas input signal is weak, install an external FM antenna
in an area with good reception.
Can't receive radio
broadcast.
Symptom Check/Remedy
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function. Aspect ratio cannot be
changed.
MISCELLANEOUS
35P~54P(DB400M)-SEA 2004.3.18 4:55 PM Page 53