Samsung HT-DB400M - Manual (Page 48)

47
Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
2 1
Tune in to the
desired station. Press FM or
AM button.
Automatic Tuning 2
Manual Tuning
2 1
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the Function
button to select the
desired band (FM, AM).
Press the STOP ( ) button
to select "MANUAL" and
then press and hold button to
automatically search the band.
Automatic Tuning 2
Press STOP ( ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
Manual Tuning
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
When is pressed, a
preset broadcast station is
selected.
Press and hold to
automatically search for
active broadcasting stations.
Briefly press to
increase or decrease the
frequency incrementally.
Automatic Tuning 1
Remote Control Unit
Main Unit
35P~54P(DB400M)-SEA 2004.3.18 4:55 PM Page 48