Sony HTDDW670 - Manual (Page 32)

masterpage:Left
lename[E:\SEM_Janet\Revision_DDW670\J904000_2342216121DDW670_GB\2342216121\G
B070TH_HT-DDW670-U.fm]
32 GB
model name1[HT-DDW670]
[2-342-216-12(1)]
You can enter a name of up to 8 characters for
preset stations and inputs selected with input
buttons, and display it in the receiver’s display.
1
To index a preset station
Press FM or AM to select the FM or AM
band, then tune in the preset station
you want to create an index name for
(page 21).
To index an input
Press the input button to select the input
you want to create an index name for.
2
Press MAIN MENU repeatedly to select
“
CUSTOM ”.
3
Press or repeatedly to select
“NAME IN”.
4
Press ENTER.
The cursor flashes and you can select a
character.
5
Use or and + or – to create an
index name.
Press + or – repeatedly to select a character,
then press > to move the cursor to the next
position.
Tips
• You can select the character type as follows by
pressing + or – repeatedly.
Alphabet (upper case)
t Numbers t Symbols
• To enter a blank space, press + or – repeatedly
until a blank space appears in the display.
• If you made a mistake, press < or > repeatedly
until the character you want to change flashes,
then press + or – repeatedly to select the correct
character.
6
Press ENTER to store the index name.
Note (Models of area code CEL, CEK only)
When you name an RDS station and tune in the station,
the Program Service name appears instead of the name
you entered. (You cannot change the name of a
Program Service name. The name you entered will be
overwritten by the Program Service name.)
You can set the receiver to turn off automatically
at a specified time. Use the remote for the
operation.
Press SLEEP while the power is on.
Each time you press SLEEP, the display changes
cyclically as follows:
2-00-00
t 1-30-00 t 1-00-00 t
0-30-00 t OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, press SLEEP. The remaining time appears in the
display. If you press SLEEP again, the sleep timer will
be canceled.
Other Operations
Naming preset stations
and inputs
Using the Sleep Timer
GB01COV_HT-DDW670-U.book Page 32 Saturday, January 1, 2005 7:54 AM