Sunbeam MX001 - Manual (Page 6)

Before using your Mixmaster
Before assembling your Sunbeam Mixmaster,
be sure the power cord is unplugged from the
power outlet and the speed control dial is in
the OFF position.
1. Press the ‘head locking’ button, located
under the head of the Mixmaster. While
the button is depressed ease the head of
the Mixmaster back, see Figure 1. The
Mixmaster head will lock into this tilt
position, see Figure 2.
2. Select the desired attachments
depending on the mixing task to be
performed;
– Beaters for creaming butter and sugar,
mixing cake mixes and whisking cream
and egg whites.
– Dough hooks for kneading dough and
other heavy mixtures.
3. Insert selected attachment;
Beaters – Take the two beaters,
place the oval shaped beater (A)
into the socket marked with the
symbol ( ). Likewise, place the square
shaped beater (B) into the socket marked
with the symbol ( ). See Figure 3.
Dough hooks – Take the two dough
hooks, place the dough hook with
the small washer (A) into the socket
marked with the symbol ( ).
Likewise, place the dough hook
with the large washer (B) into the socket
marked ( ). See Figure 4.
4
Using your Sunbeam Mixmaster
A
B
Press locking
button down and
tilt mixer head
backward
Figure 1
Figure 2
Figure 4
Figure 3