Siemens Hicom 300E - Manual (Page 15)

15
Putting into service
Logging mobile units onto a telephone system
Your phone should be logged on and ready to use. If this is not the case then
contact your System Administrator.
Note:
l
In the case of Hicom cordless E, the mobile units are not logged on to
stations (base stations), but rather to the Hicom 300E telephone
system. In this case,
Station
always means system.
Activating/deactivating mobile units
Activating the mobile unit:
h
Press the On/Off key - acknowledgement tone is heard.
Deactivating the mobile unit:
h
Press the On/Off key until the display is clear – you hear
the acknowledgement tone.
Activating/deactivating keypad protection
This allows you to protect your mobile unit against inadvertent key activation,
e.g. when carrying it in your bag. Call are signalled even if keypad protection
is on and can be answered as in the same way as when the telephone is
switched on.
Prerequisite: mobile unit is activated.
Activating keypad protection:
h
Press the On/Off key for less than 1 second.
Keyboard Display when keypad protection is on.
protected
Deactivating keypad protection:
h
Press the On/Off key for less than 1 second.