Siemens SITRANS P - Manual (Page 20)

SITRANS P measuring instruments for pressure
Transmitters for gage, absolute and differential pressure
ZD series for gage and absolute pressure
2/20 Siemens FI 01 · 2009
2
F) Subject to export regulations AL: 9I999, ECCN: N.
Selection and Ordering data Order No. Ord. Code
SITRANS P pressure transmitters, ZD
series for gage and absolute pressure 7M F 1 5 8 0 -
Conformity error 0.25%, range adjustment
1 : 5 (max. 1 : 10), housing and process
connection made of stainless steel,
membrane made of ceramic, 2-wire system,
output 4 ... 20 mA 7 7 7 7 0 7 7 7
Input variable
Gage pressure
} 1
Absolute pressure }
F)
2
Measured range Span
0 ... 2 bar
(0 ... 29 psi) 0 ... 0.4 / 2 bar
(0 ... 5.8 / 29 psi) } D
0 ... 10 bar
(0 ... 145 psi) 0 ... 2 / 10 bar
(0 ... 5.8 / 145 psi) } E
0 ... 50 bar
(0 ... 725 psi) 0 ... 10 / 50 bar
(0 ... 145 / 725 psi) } F
0 ... 200 bar
(0 ... 2900 psi) 0 ... 40 / 200 bar
(0 ... 580 / 2900 psi) } G
0 ... 400 bar
(0 ... 5800 psi) 0 ... 80 / 400 bar
(0 ... 1160 / 5800 psi) } H
Other version (on request)
add Order Code and plain text:
Process connection: ............ Z J 1 Y
Process connection
G½B male thread and G
1 /
8
B female thread } A
G½B to EN 837-1 F) B
Female thread ½-14 NPT F) C
G 1“ male thread F) M
Design
Process connection vertically downwards,
thread in connector M16x1.5
} 1
Process connection horizontally to rear,
thread in connector M16x1.5 2
Process connection vertically downwards,
thread in connector ½"-14 NPT } 3
Process connection horizontally to rear,
thread in connector ½"-14 NPT 4
Selection and Ordering data Order Code
Further designs
Please add "Z" to Order No. and specify Order
code(s) and plain text.
Quality inspection certificate (Factory cali-
bration) to IEC 60770-2 supplied C1 1
Factory certificate
to EN 10204-2.2 supplied C1 4
Oxygen application, oil and grease-free
cleaned
(only in conjunction with the sealing material
Viton between sensor and enclosure and only
in conjunction with measuring ranges >= 1
bar g and 1 bar abs)
E1 0
Sealing material FEP between sensor and
housing, instead of Viton
max. operating pressure 15 bar (218 psi),
max. measuring temperature -10 ... +50 °C
E2 0
Additional data
Please add "Z" to Order No. and specify Order
code(s) and plain text.
Measuring range to be set,
specify in plain text:
Y01: ... up to ... mbar, bar, kPa, MPa, psi
Y0 1
TAG number made of stainless steel Y1 5
Accessories Order No.
Quality inspection certificate (Factory
calibration) to IEC 60770-2 supplied later,
specify factory of transmitter. 7MF1564-8CC11
}
Available ex stock
© Siemens AG 2008