Sony CRX-1611 - Manual (Page 9)

12 13
Closing the Computer
Refer to your computers user manual for instructions on how to close
the computer.
Using Discs
Storing Discs
• Do not store the disc in a location subject to:
–high humidity
–high temperature
–excessive dust
–direct sunlight
Care of Discs
• Hold the disc by its edge. Do not touch the surface.
• Data cannot be recorded if the recording surface is contaminated.
Analogue AUDIO OUT connector
The pin assignment for the audio out connector is as follows:
IDE INTERFACE connector
1 Firmly insert one end of the interface cable into the INTERFACE
CONNECTOR.
2 Attach the other end of the cable to the PRIMARY or
SECONDARY IDE interface connectors on the computers main-
board.
Refer to your computers user manual for more information on
where these connectors will be located.
pin Audio Signal
1 R signal
2 ground
3 ground
4 L signal
INTERFACE
CONNECTOR
Pin 1
INTERFACE cable