Sennheiser Double Charger L 1032 User Manual
Page 9
9
CHARGING OPERATION
Insert the SKM 1030 or SKM 1032 hand transmitter with BA 1032 battery pack
inserted or BA 1032 battery pack into the L 1032 charger for charging. The
charging process then begins automatically. With BA 1032 battery pack, pay
attention to the direction of insertion (polarity and special contacts).
INDICATOR LEDS
Each charging port is controlled separately, whereby the associated LEDs (L) serve
to monitor the charging process.
Red LED is flickering:
Ready for operation! Please insert the
battery pack. (If the red LED continues
to flicker after the batteries are inserted,
the charging current circuit is not closed:
Battery pack defective).
Red LED is lit continuously:
Quick charge. Do not interrupt!
Red LED is blinking brightly:
Defective battery pack!
(Short circuit in charging circuit!)
Green LED is lit:
Quick charge is finished.The unit has
switched to trickle charge.