Sakar 15097 - Manual (Page 5)

- 5 -
Preparing Your Camera for Use
Battery Installation
Your camera requires two AAA batteries. Insert the batteries into the camera:
1. Slide the cover of the battery compartment open.
2. Insert batteries according to the polarities (+ and -) indicated on the inside of the battery
cover.
3. Close battery compartment.
WARNING: Opening the battery compartment and/or removing the battery will erase the photos
currently stored in the camera. Download your photos as often as possible. Photos may be lost
when the batteries run low.
The LCD will flash when your batteries are running low, you will need to replace your camera’s
batteries, please download any photos you have on the camera before opening the battery
compartment. When the battery voltage drops to 2.2V the LCD will display “Lo” and the camera will
turn off automatically.
Note: If you do not intend to use your camera for an extended period, remove the batteries to
avoid battery leakage and corrosion.