Sanyo CLT-2423 User Manual
Page 7
BASICS
Receiving a call
When an incoming call is received, both handset and base screens
light and show caller information*. The incoming call LED on the
handset and the SPEAKER key on the base flash.
* A subscription is required from your local phone company to receive
Caller ID information on your phone. See
Caller ID Features
, page 22.
Using handset:
1.
Press TALK/CALL BACK to answer the call.
Note: If handset is in the base cradle, remove it from base before
pressing the TALK/CALL BACK key.
2.
Press TALK/CALL BACK again to hang up.
Note: If you replace the handset to the base cradle, the handset
automatically hangs up.
Using base speakerphone:
1.
Press SPEAKER to answer the call.
2.
Press SPEAKER again to hang up.
Making a call
Using handset:
1.
Press TALK/CALL BACK.
Note: If handset is in the base cradle, remove it from base before
pressing the TALK/CALL BACK key.
2.
Dial the phone number.
The screen shows the number as you enter.
3.
Press TALK/CALL BACK again to hang up.
13
Resetting to default
You can reset the phone programming to the initial factory default
settings.
The default settings are:
Language - E
En
ng
gl
li
is
sh
h
Contrast - 2
Area Code - _
_
_
_
_
_
Ringer Tone - R
Ri
in
ng
ge
er
r
T
To
on
ne
e
1
1
Time Set - 1
12
2:
:0
00
0
A
AM
M
Default Set - 2
2
N
NO
O
1.
Make sure the phone is OFF.
2.
Press FLASH/PROGRAM on the base six times.
D
DE
EF
FA
AU
UL
LT
T
S
SE
ET
TT
TI
IN
NG
G
1
1Y
YE
ES
S
2
2N
NO
O
shows on screen.
3.
Press CID
▲ or ▼, or the 1 or 2 key to select your choice.
4.
Press FLASH/PROGRAM to confirm.
12
Telephone number
Channel No.
Call timer
Volume level
INITIAL PROGRAMMING
CLT-2419-2423E-NEW 3/14/03 3:32 PM Page 12