SMC Networks WI-FI PHONE FOR SKYPETM WSKP100 User Manual
Wskp100 wi-fi phone for skype, Quick start guide
USB/Power
Charge Port
Headset
Jack
Alphanumeric
Keypad
Navigation
Key
Right
Soft Key
Left
Soft Key
End/Power
Key
LCD
Display
Volume
Button
Send
Key
10
1
9
2
3
8
7
6
4
5
Introduction
Description
1. Install Battery
3. Power On Phone
2. Charge Battery
The whole world
can talk for free.
Skype.Com
WSKP100
Wi-Fi Phone for Skype™
Quick Start Guide
WSKP100
E072006-EK-R03
150200027900E
The WSKP100 is a Wi-Fi (IEEE 802.11b/g) wireless phone that enables
you to make Skype calls without using a computer. The phone enables
you to use your normal Skype account with complete mobility, allowing
you to talk from any location where you have an Internet connection
through a nearby access point.
Package Checklist — The WSKP100 Wi-Fi Phone package includes
these items:
• One Wi-Fi Phone for Skype
TM
(WSKP100)
• One Lithium-Ion battery
• One headset
• One mini USB cable
• One AC power charger
• This Quick Start Guide
• User Manual CD
Inform your dealer if there are any incorrect, missing or damaged
items. If possible, retain the carton, including the original packing
materials. Use them to repack the product in case there is a need to
return it.
Getting Started — After unpacking the Wi-Fi Phone for Skype
TM
, you
must install and charge the battery pack before turning on the phone.
Just follow the steps in this guide.
Before preparing the Wi-Fi Phone for Skype
TM
for use, first become
familiar with its main keys, buttons, and other hardware features.
1.
LCD Display — Colour software menu display.
2.
Navigation Key — Four-direction software navigation key. Pressing
the key down selects the current option.
3.
Right Soft Key — Negative action key. Cancels or returns to
previous menu.
4.
End/Power Key — Ends a call. Turns the power on and off. Press
for two seconds to power on. Press two to four seconds for menu.
Press for more than four seconds to power off.
5.
Headset Jack — Jack for headset connection.
6.
USB/Power Charge Port — Power charger connection for charging
battery.
7.
Alphanumeric Keypad — Includes 0-9, A-Z, *, and # keys. The
[a/A *] key selects upper- or lower-case characters, numbers, or
hexadecimal. The [ 1 ] key selects common punctuation marks
during text input. The [ # ] key selects special characters and
symbols during text input
8.
Send Key — Calls a selected contact.
9.
Left Soft Key — Positive action key. Selects menu option.
10.
Volume Button — Adjusts volume of the speaker.
Keypad Lock — The phone keypad can be locked by pressing the Left
Soft Key together with the [a/A *] key. Pressing the two keys again
unlocks the keypad.
Warning: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Remove Battery Compartment Cover — Place the phone face down.
Push and slide down the battery compartment cover until it becomes
free.
Install Battery — Place the battery into the compartment. Be sure the
text label on the battery is facing out and the battery’s three metal
contacts point to the top of the phone.
Replace Battery Compartment Cover — Slide the battery
compartment cover back onto the phone until it clicks firmly into place.
Push Off
Install Battery
Connect Battery Charger — Lift up the rubber cover on the mini USB
charger port and connect the power charger to the port. Then, plug the
charger into an AC electrical outlet.
Fully Charge Battery — For the first time use, allow eight hours to fully
charge the battery.
After the first-time charge, the battery requires only three hours to
charge.
Note:
The power charger automatically adjusts to any voltage
between 100-240 volts at 50 or 60 Hz.
Lift Cover
Connect
Charger
Power On Phone — Push and hold down the End/Power key for more
than two seconds to power on the phone.
Go to step 4 to learn how to make initial settings and start using the
phone.
ABC
2
1
DEF
3
JKL
5
MNO
6
GHI
4
PQRS
7
TUV
8
WXYZ
9
+
0
#
*
Power On
a/A
ww w.smc.com
Skype™ is a trademark
of Skype Technologies S.A.
TECHNICAL SUPPORT
From U.S.A. and Canada
World Wide Web:
(24 hours a day, 7 days a week)
http://www.smc.com
(800) SMC-4-YOU
Phn: (949) 679-8000
If you are looking for further contact
Fax: (949) 679-1481
information, please visit
http://www.smc.com
From Europe :
Contact details can be found on
38 Tesla
http://www.smc.com
Irvine, CA 92618
Phone: (949) 679-8000
Driver updates:
http://www.smc.com/index.cfm?event=downloads.searchCriteria&localeCode=EN_USA
Model Number: WSKP100
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate
and reliable. However, no responsibility is assumed by SMC for its use, nor for
any infringements of patents or other rights of third parties, which may result
from its use. No license is granted by implication or otherwise under any patent
or patent rights of SMC. SMC reserves the right to change specifications at any
time without notice.
Copyright © SMC Networks, Inc., 2006. All rights reserved. SMC is a registered
trademark; EZ Connect™ and Barricade™ are trademarks of SMC Networks, Inc.
Other product and company names are trademarks or registered trademarks of
their respective holders.
Document Outline
- 1. Select the language of the display. The default is English.
- 2. Scroll down and read the entire Skype Agreement. Press the Left Soft Key to accept the Agreement.
- 3. The phone searches for nearby access points and lists those that it finds.
- Normally, you need to be within 90 m (300 ft) of a network's wireless access point to be able to connect to it. If the network you want to connect to is not on the list, move to another location and try again.
- 4. From the wireless networks list, select the wireless network that you want to connect to and press the Left Soft Key to access Options menu. Then select “Connect.”
- If a security key is required, the phone prompts for the key value. Security keys should be provided by the wireless network operator.
- The access point information is stored in the phone’s memory as a “Preferred Network” and will be used next time the phone is powered on.
- 5. If you already have a Skype account, sign in with your user name and password.
- Note that if you are already signed in to your Skype account from your PC, you should sign out first before using the phone. You cannot sign in to your Skype account from two devices at the same time.
- You can also create a new account using the phone.
- When your Skype sign in is successful, you can start making calls. Your current list of contacts should display in the Contacts screen.
- 1. Be sure you have a valid network connection before making a call.
- 2. Press the Right Soft Key to select Contacts.
- 3. Use the Navigation key to scroll down and select the contact name you want to call.
- 4. Press the Send key to make the call.
- 5. When you have finished the call, press the End button.
- WSKP100
- Wi-Fi Phone for Skype™
- Quick Start Guide