SV Sound PC12-NSD - Manual (Page 7)

Crossover Feature Switches. If you allow your DD/DTS sur-
round-sound receiver or processor to manage bass frequencies
(again, highly recommended), this switch should be set to
“Disabled”, eliminating the effects of the “Crossover Frequency”
knob and allowing your sub to reproduce just what is fed from the
receiver. If you use the sub in a two channel (stereo only) con-
figuration, then “Enable” the crossover and adjust the knob to best
blend the sub into the output of your speakers.
Power. This heavy-duty two-position switch next to the power
cord will completely cut the power to your sub amp. Flip this
switch to off before you ever move the sub or change inputs or
outputs. Do not plug this sub into receiver convenience power
outlets. Allow five minutes of “off” time before switching back
“on”.
Fuse. User replaceable, contact your dealer if you have trouble
finding one. The fuse can be accessed by a small door immedi-
ately next to the power cord fitting
(where you should also find a spare one for your use).
SV Sound
Chapter 5-2