Sunfire 200 ~ five - Manual (Page 18)

User's Manual
18
APPENDIX
© 2005 SunÞ re Corporation.
All rights reserved. SunÞ re Corpora-
tion re serves the right to improve
its products at any time. Therefore,
speciÞ cations are subject to change
without notice.
Man u al part # : 913-113-00 Rev B
Signature 400~Þ ve
Power output
400 watts con tin u ous, per chan-
nel, all chan nels driven into
eight ohms, from 20 Hz to 20 kHz
with no more than 0.5% T.H.D.
Power at clipping, min
800 watts per chan nel into four
ohms.
1200 watts per chan nel into two
ohms (time limited basis).
Hum and Noise
-118 dB, A-Weighted
Maximum output current
120 amps peak to peak per ch.
Maximum output voltage
56.6 Vrms
Output impedance Front
Left and Right channels
Voltage source: Approx. zero ohms
Current source: Approx. one ohm
RCA Input impedance:
24 k Ω
Input sensitivity for rated
output
Unbalanced: 1.9 Vrms
Bal anced: 0.95 Vrms
XLR Input impedance:
10 k Ω, each leg balanced to
ground
Female XLR
Pin 1 is ground
Pin 2 is positive (hot)
Pin 3 is negative (cold)
12 VDC Trigger Inputs
Input voltage range 5 -18 VDC
Impedance: approx 600
Ω
(20 mA @ 12 V)
Removable terminal block, and
dual 1/8" mini jacks for daisy
chaining.
Power Consumption
45 W At idle
400 W Typical (1/8th power)
1800 W Ab so lute Max (Fuse
Limit)
Dimensions
17.0 inches wide
5.9 inches high (including feet)
16.7 inches deep (to tips of con-
nectors)
Weight
38 lbs
Finish
Brushed aluminum with black an-
odize or a light titanium Þ nish.
200~Þ ve
Power output
200 watts con tin u ous, per chan-
nel, all chan nels driven into
eight ohms, from 20 Hz-20 kHz
with no more than 0.5% T.H.D.
Power at clipping, min:
400 watts per chan nel into four
ohms.
800 watts per chan nel into two
ohms (time limited basis).
Hum and Noise
-115 dB, A-Weighted
Maximum output current
80 amperes peak to peak per ch.
Maximum output voltage
40.0 Vrms
Output impedance Front
Left and Right channels
Voltage source: Approx. zero ohms
Current source: Approx. one ohm
RCA Input impedance
24 k Ω
Input sensitivity for rated
out put
Unbalanced: 1.3 Vrms
Bal anced: 0.65 Vrms
XLR Input impedance
10 k Ω, each leg balanced to
ground
Female XLR
Pin 1 is ground
Pin 2 is positive (hot)
Pin 3 is negative (cold)
12 VDC Trigger Inputs
Input voltage range 5 -18 VDC
Impedance: approx 600
Ω
(20 mA @ 12 V)
Removable terminal block, and
dual 1/8" mini jacks for daisy
chaining.
Power Consumption
45 W At idle
200 W Typical (1/8th power)
1800 W Ab so lute Max (Fuse
Limit)
Dimensions
17.0 inches wide
5.9 inches high (including feet)
16.7 inches deep (to tips of con-
nectors)
Weight
32 lbs
Finish
Brushed aluminum with black an-
odize or a light titanium Þ nish.
SpeciÞ cations