Sony WEGA KV-32HS500 - Manual (Page 28)

27
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
View (monitor) what is being
recorded Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration above).
Set up the TV remote control
to operate the VCR(s) If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 43-44.
Activate the TV remote
control to operate the VCR(s) Set the A/V slide switch to the position you programmed for the VCR. Then
press
VCR/DVD FUNCTION .
Control VCR functions with
the TV remote control See “Operating a VCR” on page 58.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on pages 72-73.