Safety regulations – Sony VRD-VC30 User Manual

Page 2

Advertising
background image

2

Safety
Regulations

WARNING

You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.

CAUTION:

As the laser beam in the VRD-VC30 is harmful
to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personnel
only.
The use of optical instruments with this
product will increase eye hazard.
The use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.

The VRD-VC30 is classified as a CLASS 1
LASER PRODUCT.
The CLASS 1 LASER PRODUCT notice is
located on the enclosure.

Bei diesem VRD-VC30 handelt es sich um ein
Laser-Produkt der Klasse 1.
Das Etikett mit der Aufschrift LASER
KLASSE 1 PRODUKT befindet sich auf dem
Gehäuse.

FCC Compliance:

This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

The shielded interface cable recommended in
this manual must be used with this equipment
in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC
Rules.

Notes:

If you have any questions about this product,
visit the user support web site listed in
“Support Overview” on page 58. The
telephone number below is not for customer
service but only for official purposes.

CLASS 1
LASER PRODUCT

LASER KLASSE 1
PRODUKT

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

Declaration of Conformity

Trade Name:

SONY

Model No.:

VRD-VC30

Responsible Party: Sony Electronics Inc.
Address:

16530 Via Esprillo,

San Diego, CA 92127

U.S.A.

Telephone No.:

858-942-2230

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful

interference, and

(2) This device must accept any interference

received, including interference that may
cause undesired operation.

Advertising